Planetary gears
IMS.28 Eco MAX LN®
Our plastic planetary gear from the Eco Series with outer diameter 28 mm combines efficiency with economy. In the welded MAX version it stands for improved performance with less installation space; furthermore, it meets the increased demands on low noise performance
Low Noise (LN)
Due to the use of helical gearing in the first stage particularly low noise.
Economy
Modular system, optimized material mix: For economic solutions even in small quantities
Temperature
Also ideally suited for demanding temperature ranges from -15° to +65°C.
Technical data
Parameter
Technical data
| 1-stage | 2-stage | 3-stage |
|---|---|---|---|
| Permissible output torque TAB (CB = 1.0) | 0.4 Nm | 1.0 Nm | 2.0 Nm |
| Gear efficiency approx. | 0.8 | 0.7 | 0.7 |
| Max. Gear backlash | 1.9 °DEG | 2.0 °DEG | 2.0 °DEG |
| Recommended input speed | 3.000 rpm | 3.000 rpm | 3.000 rpm |
All dimensions in millimetres [mm]
Reductions
| 1-stage | 2-stage | 3-stage |
|---|---|---|
| 4:1 (3,71) | 14:1 (13,73) | 51:1 (50,89) |
| 4:1 (4,29) | 16:1 (15,88) | 59:1 (58,86) |
| 5:1 (5,18) | 18:1 (18,37) | 68:1 (68,07) |
| 7:1 (6,75) | 19:1 (19,20) | 71:1 (71,16) |
| 22:1 (22,21) | 79:1 (78,72) | |
| 25:1 (25,01) | 93:1 (92,70) | |
| 27:1 (26,85) | 95:1 (95,18) | |
| 29:1 (28,93) | 100:1 (99,51) | |
| 35:1 (34,98) | 107:1 (107,21) | |
| 46:1 (45,56) | 115:1 (115,08) | |
| 124:1 (123,98) | ||
| 130:1 (129,62) | ||
| 139:1 (139,14) | ||
| 150:1 (149,90) | ||
| 169:1 (168,85) | ||
| 181:1 (181,25) | ||
| 195:1 (195,27) | ||
| 236:1 (236,10) | ||
| 308:1 (307,55) |
Parameter
Output side with ball bearing
| 1-stage | 2-stage | 3-stage |
|---|---|---|---|
| Max. radial load (centre of output shaft) | 15,0 N | 30,0 N | 45,0 N |
| Max. Axial load | 5,0 N | 10,0 N | 15,0 N |
| Max. permissible contact pressure | 150,0 N | 150,0 N | 150,0 N |
| Weight approx. | 110 g | 115 g | 130 g |
Parameter
Gear length
| 1-stage | 2-stage | 3-stage |
|---|---|---|---|
| Length 1¹ | 25,0 ± 0,3 | 34,6 ± 0,3 | - |
| Length 2¹ | 29,6 ± 0,5 | 39,1 ± 0,5 | - |
- ¹A calculated minimum length of the gearbox is given under the condition of an optimal connection of flange and motor. Please contact us directly for your specific project.
All dimensions in millimetres [mm]